WaterTech Heated Soaker Bathtub
Heated Soaker Tub
Acrylic bath tub shell has a lifetime warranty
Select from designer colors including hard to find marble and granite selections.
Maintain the water temperature between 102 F and 104 F
Factory Direct Tub Sale from WaterTech
All WaterTech bathtubs come directly to you from their factory. They create the tub at time of order - customized just for you - no refurbished or second tubs.
Free Shipping (*Contiguous US Only)
Authorized WaterTech Dealer
Electric Heater for Soaker Tubs
Watertech's soaking bathtub heater is designed to maintain the bathtubs water temperature between 102 F and 104 F and eliminates the bather having to constantly add hot water. The heat system is comprised of a patented suction inlet and outlet fitting, on/off control, super quiet pump, 1500 KW heater, 20 minute safety timer and rigid PVC pipe that insures the heat system drains 100% when the tub is emptied. Building codes require that an access area be constructed to service the heater. The heater comes with a standard chord and plugs into a 20amp GFIC protected circuit, U.L. recognized.
White & Bone
Designer Colors: Biscuit, Linen, Almond, Mexican Sand, Cashmere, Sandbar, Ice Gray, Sterling Silver, Red & Black
Marble & Granite Colors
See Colors →
A Surface Heating System (SHS) heats the tubs acrylic surface where the radiant heater pad is installed on the back of the tub. This is the same technology used to heat car seats, heating pads and tile floors. You can now order one for a soaking, whirlpool or air bath.
An aluminum extrusion that is installed on the job. Used when tub is also to serve as a shower, can't be used on oval or irregular shaped tubs.
Removable acrylic skirts available in 5' & 6' lengths. White, Bone, Designer, Marble, & Granite Colors available.
Removable oak skirts are slightly over-sized and trim-able to fit your job requirements. Skirts are not factory installed. More information
Lift & Turn Drain
Available in chrome, nickel, polished brass and oil-rubbed bronze. Note: PVC drain is 1 1/2" and fits all tubs.
The difference between a standard drain and the Pressflow Drain and Overflow Control is that the Pressflow drain allows the bather to close the bath overflow to increase the bath water depth from 2 to 5" depending on the whirlpool model selected.
Caution- The Pressflow drain should not be closed until the bather is in the tub and the pump operating to insure that the water level will not overflow the tub. When draining the bath after use it is important to open the Pressflow drain so that the next time the bath is filled it can't overflow accidentally.
Cascading Fill & Drain
Cascading whirlpool faucet, overflow and drain combination. The sleek, thin design of the new faucet combines the functionality and convenience of filling and draining the bathtub through one integral unit with its patented backflow prevention technology. The filler and overflow are located inside the bathtub and eliminates the need for a spout. The all brass Cascading Whirlpool Faucet eliminates the chance of bumping your head or hitting your legs as you enter or exit the bathtub. The Cascade Whirlpool Faucet also eliminates the cost of purchasing a separate drain and overflow. Available in chrome, nickel and oil rubbed bronze finishes.
A clear light with interchangeable blue, red and clear lenses.
By simply pressing a button the bather may transition through 8 colors while the last selection will automatically transition through all 8 colors.
Come standard on several models, but are available for all models. Easily removed for cleaning and are available in black & white.
Acrylic Grab Bars
Clear acrylic with nickel, chrome, or brass inserts or white, biscuit, or bone. Grab handles are not factory installed but are easily installed on the job site by contractor or plumber.
The ultimate water purification system that automatically neutralizes any bacteria, virus or odor in the water. All WaterTech baths are U.L. certified for 100% drainage. This certifies that the water lines on WaterTech baths drain 100% insuring that no used bath water remains or is trapped in any of the waterlines. The additional advantage of having an ozonator installed is that the ozone pumped through the system also effectively sanitizes the internal components of pipes, pump, jets, injectors, etc. More Information
• Choosing a Bathtub - Features to Consider when Purchasing a Bathtub
• Spa Tubs - Whirlpool, Air, Heated Soaking or Tub Only?
• Air Tub - Find out how Air Systems Vary
• Whirlpool Tubs - Explore Whirlpool Tub Features
• Tubz.com - Contact us, we are here to help