Barclay Freestanding Tub
Unique and Elegant, Barclay Freestanding Soaking Tubs
Find traditional Roll Top or Slipper Baths with Claw Feet or Ultra Modern Tubs.
Choose from Copper, Acrylic, Cast Iron, Stainless Steel or Solid Surface.
Barclay is the fashionable approach for revitalizing your bathroom decor with an elegant bathtub. From its inception, they have offered the products and styles that make your bathroom your personal showroom.
Large Selection of Barclay Baths on Sale with Free Shipping
Use the links below to find your bathtub style, click on the link for all the bathtub selections.
Authorized Barclay Dealer
Customize your new bathtub with a vibrant color from the palette of Sherwin Williams durable Protective Marine Paint. Barclay will custom paint the exterior of your cast iron or acrylic tub with the color of your choice. Be bold or be subtle. Sherwin Williams offers an array of fabulous hues to personalize your bathroom decor. Awaken your creativity! The charge for black or bisque paint is $160. The charge for designer colors is $250. See colors: http://protective.sherwin-williams.com/color/protective-tools/
Barclay resin soaker tubs are cast in a joint-free mold using a polyester-aluminum trihydrate blend material that hardens to a solid surface. Resin's non-porous surface naturally resists stains, scratches and discoloring. Sometimes referred to as "man-made stone", its extreme durability helps to preserve its silky matte finish. This versatile material also allows more freedom of design since it can be cast into countless shapes and forms.
Care and Maintenance
Clean water will remove most dirt from your resin tub. Use only mild cleansers that are safe for painted surfaces when necessary. Do not use abrasives, acids or ammonia. Wipe dry after each use to retain original beauty.
Small Scratch Repair:
If a minor scratch should occur, rinse any dirt from surface with clean water and rub in small circular motions using #800 grit sandpaper until scratch disappears. Follow with #1200 sandpaper to smooth area. Dry with a soft towel and finish by polishing with automobile polish.
Barclay double acrylic tubs boast 2 sheets of acrylic wrapped around a durable fiber glass core for a sleek finish inside and out. All acrylic tubs are protected by a thin sheet of film during shipment. Vacuum molded acrylic claw foot tubs are a light-weight, economic alternative for those who do not have the structural requirement for a cast iron tub.
Care and Maintenance
The non-porous surface of an acrylic tub makes it very easy to keep clean. For routine cleaning you may use a non-abrasive soap. Dish washing detergent such as Joy®, Palmolive®, Ivory®, etc and a soft sponge or cloth is all that you need. If an accident occurs that requires something stronger, the following are SAFE to use: Fantastic®, Tackle®, Top Job®, Formula 409®, ScrubFree®, Calgon Bath®, Windex®, Clorox Bleach®, Spiffits® Bath, Glass Plus®, and Spic & Span Powder®. DO NOT Clean Your Acrylic Bathtub with Paint Thinner, Goof OFF®, Scrubbing Bubbles®, Acetone, Lacquer Thinner, M.E.K. ® or other chemicals that attack the structural integrity of plastics (including, but not limited to, acetones). Use of these chemicals will destroy the acrylic surface of your bathtub and there is no way to reverse the damage caused by this type of chemical reaction. Use of these chemicals will void your warranty. It is simple to restore the finish of your tub, should scratches or dulling occur. We recommend the use of a liquid polisher such as Gel-Gloss®. Deep scratches or burns can be removed with very fine sandpaper (600 grit or higher) and then finished with a liquid polish.
Barclay copper tubs are made from 16 gauge or lower copper sheet. Due to the handcrafted nature of their product, there will be some variation in size, hammering and finish. Copper finish is a living finish and will patina over time. Barclay Satin Nickel tubs are fashioned from copper with a pewter (also referred to as Satin Nickel) finish and will not patina under normal circumstances.
Care and Maintenance
To prevent water spotting wipe dry with a soft cloth after each use. Do not use copper or silver cleaners or any abrasive or harsh chemicals such as ammonia, acid, bleach, etc. Wash tub with mild soap and water and wipe dry with a soft cloth. Occasionally apply beeswax to maintain rustic finish. Polishing with Olive Oil when needed will enrich the patina over time.